InSite® Self-Adhesive Foamboard 40" x 60", 3/16" (Case/25)


565.60 565.6 USD 565.60


Not Available For Sale

This combination does not exist.

Proprietary Reveal® Foam Center

InSite® Self Adhesive is an extruded polystyrene foamboard featuring the proprietary Reveal® memory foam center faced on one side with smooth, clay-coated paper and either Low-Tack (green liner) or High-Tack (black liner) cold pressure-sensitive adhesive surface on the other, covered by a protective release liner.

Available with Low-Tack or High-Tack Adhesive

InSite® Self Adhesive Low-Tack has a repositionable adhesive allowing for multiple placement prior to bonding. Once desired alignment is achieved, finalize the bond by activating with a plastic squeegee or rubber roller; place in a cold vacuum frame; or feed through a cold roller laminator. If mounting manually and not using the aid of a roller, place the mounted print under weight during the first few hours while adhesive cures for best results.

InSite® Self Adhesive High-Tack is an aggressive adhesive that immediately grabs to smooth paper and photo media so correct placement the first time is essential. Once applied, manually burnish, place in cold vacuum frame, or feed through cold rollers–as above–to fully activate the adhesive.

Manual application is quick and easy with simple peel-and-stick use.